LZT2900 Metalized Flexible Reflective Sheeting

◆ Metalized Flexible Micro-prismatic Reflective Sheeting ◆ Robust Performance for 3 Years in Outdoor Conditions ◆ Utilize Silver for Enhanced Visibility ◆ Surface Enables Cutting in Any Orientation ◆ Perfectly Suited for Traffic Bollards and Barriers

Description: LZT2900 Metalized Flexible Reflective Sheeting is designed to enhance the reflective brightness of traffic control devices within construction zones. Its metallized surface allows it to be cut in any position, making it ideal for use on traffic bollards and drums.

Brand	LZT
Series	LZT2900
Service Life	3 Years
Type of adhesive	Pressure-sensitive Adhesive(PSA)
Color	Silver
Specification	1.22 x 45.72m/roll (48in x 50yd) or customized
Main Applications	Water Wall/Reboundable Bollard/Traffic Drums

Enhanced Reflectivity: The metallized surface significantly improves reflective performance, ensuring traffic control devices remain visible in low-light conditions.

Versatile Cutting Options: The sheet is designed to be easily customizable and can be cut in any position, allowing for custom application to a variety of surfaces and shapes, including traffic bollards and guardrails.

Durability: With a lifespan of up to three years, it resists wear and tear, ensuring long-lasting durability in harsh environments.

Flexible Design: Its flexibility allows for easy application to curved or irregular surfaces, ensuring a secure fit and enhancing overall reflectivity and visibility.

Pressure-Sensitive Adhesive: The strong adhesive backing adheres securely to a variety of substrates, even in adverse weather conditions.

The LZT2900 Metalized Flexible Reflective Sheeting is ideal for traffic drums, enhancing visibility and safety by clearly marking boundaries in low-light conditions, while also adding an aesthetic touch. When applied to reboundable bollards, it ensures high reflectivity, making them more noticeable to drivers, thus reducing collision risks. Additionally, its use on traffic barriers provides effective delineation for construction zones and road closures, ensuring that hazards are easily identifiable.

What are the packaging requirements for reflective sheeting?
Each roll of reflective sheeting should be wrapped in PET film and sealed with tape. It must then be suspended in a carton using a bracket. The outer packaging should be clearly marked to indicate that it needs to be protected from rain, exposure to sunlight, heavy pressure, and should be kept away from fire and heat sources.

What are the transportation for reflective sheeting?
Reflective sheeting should be handled with care to avoid collisions. Before transportation, check for any damage to the packaging; if any damage is found, it should be sealed before transporting. When transporting used reflective sheeting, it must be fixed with plastic brackets and then packed securely. Large-area reflective sheeting can be rolled into a large tube for easier transport. For reflective sheeting cut into smaller pieces, it should be stacked for transportation, with a maximum stacking height of 5cm, which is approximately 100 sheets.

What are the storage requirements for reflective sheeting after purchase?
Reflective sheeting should be used within one year of purchase. It must be stored in a dry, clean, and ventilated room, away from acids, alkalis, and other corrosive materials, as well as humidity and direct sunlight, and at least 2 meters away from heat sources. The indoor temperature should be maintained between 5℃ and 35℃, with relative humidity not exceeding 70%. Before use, the reflective sheeting should be placed in an environment with a temperature of 20-28℃ for 24 hours to ensure optimal adhesive performance. Additionally, when stacking, the sheeting must be aligned according to the arrows, with boxes stacked neatly in a maximum of 5 layers, and cross stacking or mixing boxes of different sizes is prohibited.

What are the guidelines for cutting reflective sheeting?
The cutting environment must be clean to prevent dust and debris from adhering to the film due to static electricity. The temperature should be maintained between 20-28℃, with indoor humidity not exceeding 70%. If humidity is too low, it can be adjusted by sprinkling water on the ground or using a humidifier. The cutting knife must be clean and sharp, and the cutting mat should have a flat, hard surface. When cutting, the blade should be inclined at an angle of 10° to 30°. Films of the same shape and size should be stacked flat on a plate, with a maximum stacking height of 5cm (about 100 sheets). It is essential to avoid contaminating the reflective sheeting with stains or scratching it, as this can impact its reflective brightness. When using a cutting plotter, the cutter head pressure should be set to 400-500g, and the cutting speed should be 2-3cm/s. Always check that the cutter head is sharp before use and opt for high-quality, larger cutter heads for engraving. Unused reflective sheeting can be returned to its original packaging or rolled up tightly on a stand, but it should not be placed against a wall or in contact with other films.